Toggle Main Menu Toggle Search

Open Access padlockePrints

The Newcastle University research output collection, currently available on ePrints, will shortly be moving to a new open repository platform, Figshare. To prepare for the data migration we have paused adding new content to ePrints, and will resume once the new repository is launched. During this time you will continue to have access to ePrints (but no new content will appear). We will share updates here when available.

Effect of MWCNT filled epoxy adhesives on the quality of adhesively bonded joints

Lookup NU author(s): Maria Konstantakopoulou, Dr George Kotsikos

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.

Abstract

Most adhesively bonded joints exhibit adhesive or cohesive failure, i.e. failure at the adhesive/adherend interface or within the adhesive, respectively. The main objective of this study is to investigate the effect of surface modification of the metal substrate accompanied by modification of the adhesive properties on the strength and failure mechanism of bonded joints. A 5061 aluminium alloy has been used as the metal substrate onto which two types of surface treatments were applied; chemical surface modification and gritblasting. A standard epoxy resin was used as the adhesive medium, in which multi-wall carbon nanotubes (MWCNTs) were dispersed, with a range of weight fraction content (from 0.03% to 0.5%). The resin was fully characterised by mechanical testing in order to determine the optimum weight fraction to enhance its properties. Aluminium to aluminium and glass fibre reinforced polymer (GFRP) composite to aluminium single lap joints bonded with either pure epoxy resin or MWCNT reinforced epoxy resin were subsequently manufactured and tested. The tests show a moderate increase of the joint strength when MWCNTs are added into the adhesive with the failure mechanism changing from cohesive to adhesive. In addition, the comparison between different surface preparation methods shows that gritblasting results in considerably improved adhesive strength over chemical treatment.

Publication metadata

Author(s): Konstantakopoulou M, Kotsikos G

Publication type: Article

Publication status: Published

Journal: Plastics, Rubber and Composites

Year: 2016

Volume: 45

Issue: 4

Pages: 166-172

Online publication date: 21/04/2016

Acceptance date: 08/03/2016

ISSN (print): 1465-8011

ISSN (electronic): 1743-2898

Publisher: Taylor & Francis

URL: http://dx.doi.org/10.1080/14658011.2016.1165788

DOI: 10.1080/14658011.2016.1165788

Altmetrics

Altmetrics provided by Altmetric

Share